Gill Aluminum LJ/TJ Sand Pit Covers – Sq Ft

This LJ/TJ Sand Pit
Cover is fabricated from extruded aluminum seat plank. The ideal
cosmetic cover for your LJ/TJ sand pits. Three planks per panel are
securely welded together in a frame of 2-3/8″ x 1-1/2″ x 3/16″ aluminum
angle. Each panel comes with four retractable handles for easy
installation and removal.

A 2″ wide supporting recess is required on each
side wall for the panels. This recess is not required on the end walls.
When not using a Gill pre-fabricated sand pit form, it is important to
include a 2″ “ledge” along the sides of the sand pit to accommodate the
730148 sand pit cover. The 730148 is designed to allow a track builder
to apply the same surface as on the track for a seamless design.
Manufacturing begins upon receipt of form 730148-2 (field check guide). A
typical sand pit requires 10-11 cover panels.

Sold by the square foot. – PLEASE CALL TO ORDER 800-676-7463

730148 Instructions

(526.95 kB)

730148 CSI Spec

(28.37 kB)
730148 Dimensions Certification

(298.79 kB)

WARNING: Products may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. www.P65Warnings.ca.gov